Metalworking

Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores pile drivers and pile extractors snow ploughs and snow blowers

Portable automatic data processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a display

Machinery, apparatus and equipment (excluding the machine tools of headings 84.56 to 84.65), for preparing or making plates, cylinders and other printing components plates, cylinders and other printing components plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished)

Apparatus with a DC power input port intended for use with an AC DC power adapter shall be tested on the AC power input of the AC DC power adapter specified by the manufacturer or where none is so specified using a typical AC DC power adapter.

50 V dc

Pneumatic

Cash registers

Of an output exceeding 40 MW

DC motors of an output 37,5 W but 750 W and DC generators of an output 750 W

An exemption shall normally only apply to direct current interconnectors.

Low voltage power supplies, d.c. output

Boring milling machines for metals, not numerically controlled (excl. way type unit head machines)

In the following examples, the anode is positive in a device that consumes power, and the anode is negative in a device that provides power In a discharging battery or galvanic cell (diagram at right), the anode is the negative terminal because it is where the current flows into the device (i.e.

In a device which consumes power, the cathode is negative, and in a device which provides power, the cathode is positive In a discharging battery or a galvanic cell, the cathode is the positive terminal since that is where the current flows out of the device (see drawing).

Drilling machines for working metal, not numerically controlled (excl. way type unit head machines and hand operated machines)

A DC motor is any of a class of electrical machines that converts direct current electrical power into mechanical power.

DC motors and DC generators of an output 375 kW

These values shall be measured using 50 A direct current.

III. ACTIVITIES THAT ADDRESS THE NEED FOR A

Electric DC motors and electric DC generators, other than those of 8501.20, of an output exceeding 750 W but not exceeding 75 kW

DC motors and DC generators of an output 750 W but 75 kW

DC motors and DC generators of an output 75 kW but 375 kW

(excl. those for the industrial assembly of certain motor vehicles of subheading 87085020)

These values are measured with 50 A direct current.

She actually went and spoke to an engineering department in Afghanistan and told the head of the department the difference between AC and DC.

Boring machines for metals, numerically controlled (excl. way type unit head machines and boring milling machines)

Boring machines for metals, not numerically controlled (excl. way type unit head machines and boring milling machines)

Milling machines for metals, knee type, numerically controlled

Sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings

The S train network in Copenhagen operates at 1650 V DC, supplied from overhead lines the Copenhagen Metro uses 750 V DC, supplied from a third rail.

Keep me informed about status changes of this incidence.

Milling machines for metals, numerically controlled (excl. way type unit head machines, boring milling machines, knee type milling machines, tool milling machines and gear cutting machines)

Electric DC motors, other than those of 8501.20, of an output exceeding 735 W, but not exceeding 750 W electric DC generators of an output not exceeding 750 W

Some people convert Märklin locomotives to DC for use on DC layouts, and by buying HAMO, Märklin had begun offering a line of DC locomotives as well, first under the name of HAMO and, after buying Trix, under that name.

12 Sample Inlet

1.4 Maximum voltage continuous current transmission has to be built up in a stable EU wide network.

1.4 Maximum voltage direct current transmission has to be built up in a stable EU wide network.

IRMS instruments may be of continuous flow or dual inlet configuration.

Tool milling machines for metals, numerically controlled

Particulars of the nominal value of the direct current resistance and, in the case of resistive ignition cables, of their nominal resistance per metre

Assembly for optical discs, comprising at least an optical unit and DC motors, capable or not of double layer recording

Liquid cristal display colour video monitor having a DC input voltage of 10 V or more but not exceeding 30 V or a fix DC input voltage of 12 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of chapters 84 to 90 and 94

A direct current submarine 1,000 MW power line is being planned between Tunisia and Italy, to be operational by 2017.

An early method of high voltage DC transmission was developed by the Swiss engineer René Thury and his method was put into practice by 1889 in Italy by the Acquedotto De Ferrari Galliera company.