A headlamp shall be deemed to be a standard headlamp if

Applicable only for vehicles with headlamp levelling device

Applicable only for vehicles with headlamp levelling device

Headlamp, handcranked radio flashlight, cyanide pills, uh... Glowstick!

2.1. Headlamp cleaner means a complete device with which all or part of the light emitting surface of a headlamp or an AFS system can be cleaned

A headlamp was designed to fit in with a specific car.

I hope this is not the headlamp of an oncoming train.

Aim of a headlamp not within limits laid down in the requirements(1).

Aim of a headlamp not within limits laid down in the requirements(1).

45 to the left and to the right if there is only one dipped beam headlamp

a dipped beam headlamp that is reciprocally incorporated with another front lamp must be installed in such a way that its reference centre lies within the median longitudinal plane of the vehicle however, where the vehicle is also fitted with an independent main beam headlamp alongside the dipped beam headlamp, their reference centres must be symmetrical in relation to the median longitudinal plane of the vehicle,

6.3.2.2. starting from point HV, horizontally to the right and left, the illumination shall be not less than 12 lux for Class B headlamp to a distance of 1,125 mm and not less than 3 lux for Class B headlamp to a distance of 2,250 mm.

The passing beam and it modes shall not be operate simultaneously with the driving beam in and or another reciprocally incorporated headlamp.

Measuring luminous flux specified value of the luminous flux for testing a filament lamp in a standard headlamp as specified in paragraph 3.8.

In the case of a Class C or D headlamp, the intensities shall conform to the tables A or B in Annex 3.

4 If the lens cannot be detached from the main body of the headlamp, a unique marking as per paragraph 4.2.5. shall be sufficient.

3 If the lens cannot be detached from the main body of the headlamp, a unique marking as per paragraph 4.2.5. shall be sufficient.

The sample which most nearly conforms to the nominal dimension values shall be tested in a standard headlamp as specified in paragraph 3.9.5. and it shall be verified whether the assembly comprising the aforesaid headlamp and the filament lamp being tested meets the light distribution requirements laid down for the passing beam in the relevant Regulation.

In the event that the front position lamp or the headlamp on the same side fails, the infrared radiation generator(s) shall be automatically switched off.

The sample which most nearly conforms to the requirements laid down for the standard filament lamp shall be tested in a standard headlamp as specified in paragraph 3.9.5. and it shall be verified whether the assembly comprising the aforesaid headlamp and the filament lamp being tested meets the light distribution requirements laid down for the passing beam in the relevant Regulation.

And now in the middle of this surgery, the surgeon is racing against the clock to finish his case, which he can do he's got a headlamp.

The expert from GTB volunteered to prepare a new proposal to align the specifications for markings in all headlamp front fog lamp Regulations (TRANS WP.29 GRE 54, para.

Note The text reproduced below was prepared by the expert from GTB in order to align the text of requirements for approval markings in headlamp and front fog lamp Regulations.

In any case the marking shall be visible when the headlamp or the system is fitted on the vehicle or when a movable part such as the hood is opened.

an independent dipped beam headlamp may be installed above, below or to one side of another front lamp if these lamps are one above the other the reference centre of the dipped beam headlamp must be located in the median longitudinal plane of the motorcycle if these lamps are side by side their reference centres must be symmetrical in relation to the median longitudinal plane of the motorcycle,

an independent dipped beam headlamp may be installed above, below or to one side of another front lamp if these lamps are one above the other the reference centre of the dipped beam headlamp must be located in the median longitudinal plane of the vehicle if these lamps are side by side their reference centres must be symmetrical in relation to the median longitudinal plane of the vehicle,

an independent dipped beam headlamp may be installed above, below or to one side of another front lamp if these lamps are one above the other the reference centre of the dipped beam headlamp must be located in the medium longitudinal plane of the vehicle if these lamps are side by side their reference centres must be symmetrical in relation to the median longitudinal plane of the vehicle,

an independent main beam headlamp may be fitted above or below or to one side of another front lamp if these lamps are one above the other the reference centre of the main beam headlamp must be located within the median longitudinal plane of the vehicle if these lamps are side by side their reference centres must be symmetrical in relation to the median longitudinal plane of the vehicle,

an independent main beam headlamp may be fitted above or below or to one side of another front lamp if these lamps are one on top of the other the reference centre of the main beam headlamp must be located within the median longitudinal plane of the vehicle if these lamps are side by side their reference centre must be symmetrical in relation to the median longitudinal plane of the vehicle,

an independent main beam headlamp may be fitted above, below or to one side of another front lamp if these lamps are one above the other the reference centre of the main beam headlamp must be located within the median longitudinal plane of the motorcycle if these lamps are side by side their reference centre must be symmetrical in relation to the median longitudinal plane of the motorcycle,

an independent main beam headlamp may be fitted above, below or to one side of another front lamp if these lamps are one above the other the reference centre of the main beam headlamp must be located within the median longitudinal plane of the vehicle if these lamps are side by side their reference centre must be symmetrical in relation to the median longitudinal plane of the vehicle,

Category one subjects include photometric and physical characteristics of the lighting or light signalling devices chosen for a vehicle, headlamp aiming procedures, geometric relation between lighting devices and direction indicators, etc.

a main beam headlamp that is reciprocally incorporated with another front lamp must be fitted in such a way that its reference centre lies within the median longitudinal plane of the motorcycle.

a main beam headlamp that is reciprocally incorporated with another front lamp must be fitted in such a way that its reference centre lies within the median longitudinal plane of the vehicle.

Note The text reproduced below is transmitted by the secretariat for consideration to WP.29 and AC.1 in order to correct the symbol of the headlamp dipped beam in Table 1.

a dipped beam headlamp that is reciprocally incorporated with another front lamp must be installed in such a way that its reference centre lies within the median longitudinal plane of the motorcycle.

a dipped beam headlamp that is reciprocally incorporated with another front lamp must be installed in such a way that its reference centre lies within the median longitudinal plane of the vehicle.

Prudential control (solvency control)

Ground positioning control system control station

Drug Control Programme International Narcotics Control Board

Territorial control can take the form of military occupation, control without occupation or temporary control.

Tuoo air traffic control, air transport air traffic control, civil aviation air traffic control, Eurocontrol

So there's no control there's no control group.

Area B Palestinian civil control, Israeli military control.

Control